RH3288 1-1/4 inch SDS-Plus Rotary Hammer Drill tare da Gudanar da Jijjiga da Clutch Amintacce, 13 Amp Duty Duty Hammer don Kankare

Samfura:

RH3288

Game da wannan abu:

  • 【MOTOR MAI KARFI】Kangton Electric Rotary Hammer Drill sanye take da injin 13 Amp (1500W) wanda ke ba da ƙarfin tasiri mai ƙarfi don kammala ayyukan nauyi akan kankare, Masonry da ƙarfe.
  • 【SAUKIN YIN AIKI】Za'a iya sauya yanayin aiki guda uku cikin sauƙi - guduma kawai (chiselling-only), hamma (gudu da juyi), da rawar jiki kawai (juyawa kawai) .Akwai maɓallan sauyawa sau biyu don canza ayyukan waɗanda za su iya daɗe idan aka kwatanta da maɓallin sauyawa guda ɗaya.
  • 【ERGONOMIC DESIGN】Kangton hammer Driving dauko ergonomic zane tare da Rubber da 360 digiri daidaita rike yana ba da jin daɗin amfani.SDS-plus guduma rawar soja na iya ba da garantin amincin mai amfani da ingantaccen injin ƙera zafi da tsarin ƙasa mai hana ƙura biyu na iya tsawaita rayuwar amfani da guduma.
  • KAYAN KYAUTA】Kangton hammer saitin ya haɗa da 3 inji mai kwakwalwa (girman 8mm, 10mm da 12mm), 1 pc lebur chisel, 1 pc point chisel, takalmin tabbatar da datti, mai mai mai mota, inji mai kwakwalwa 2 na gogewar carbon da ƙarin chuck, dacewa rawar motsa jiki. Girman ramuka daga 1mm zuwa 13mm.Cajin ɗaukar kaya mai ɗaukar nauyi yana ba da cikakkiyar ajiya.
  • 【MULKI】Kangton Professional Rotary guduma Ya shafi itace, masonry, kankare da karfe.Max 1-1/4 inch diamita hakowa na kankare da na karfe ne 1/2 inch.Kangton yana ba da sabis na garanti na watanni 12.

Cikakken Bayani

Tags samfurin

RH-1_副本

Samun rawar guduma a cikin kaya na iya tabbatar da zama kayan aiki mai matuƙar amfani.Daga ayyuka masu tsanani kamar yin ramuka a cikin katangar siminti mai wuya ko sassa masu ƙarfi.Sojin guduma na Kangton ƙwararre ne wajen karyawa da huda ta cikin daskararrun abubuwa ta amfani da motsi na gaba da baya.

Motar jujjuyawar guduma ɗinmu ta lantarki tana da injina mai ƙarfi 13-ampere wanda zai iya haƙowa ta kankare kamar hannu ta takarda.An yi ƙirar ergonomic na wannan dabba don cikakkiyar ta'aziyya

Jin ƙarfin tare da sauƙaƙan maɓallan aiki kuma ku fasa bango

RH-2_副本

Drill Ta Komai

Kangton mai jujjuya guduma na lantarki yana haɓaka ta hanyar mamaye injin 13-Ampere (1500watts) wanda ke ɗaukar naushi tare da kowane amfani.Madaidaicin ɗaukar hoto ya ƙare don ƙwarewar aikinmu mai ban mamaki da ƙarfin ƙarfin injin.Wannan iko mai yawa da inganci zai ba ku damar yin rawar jiki ta hanyar katako, siminti, da ƙarfe

RH-3_副本

Kasance cikin Ji daɗi

An ƙera rawar guduma mai ƙarfi don kawo ta'aziyya ga hannayenku yayin aiwatar da waɗannan ayyuka masu ƙarfi.Ƙirar sarrafa rawar jiki yana hana ku jin wani abu kuma ƙirar ergonomic da aka kawo tare da madaidaiciyar madaidaicin roba 360-digiri rike zai ba ku damar riƙe rawar jiki a kusan kowane matsayi.

RH-4_副本

Aiki da Sauƙi

Tare da sauƙin sarrafa guduma ɗin mu mai sauƙin sarrafawa da sarrafa ƙwarewar mai amfani, ba a taɓa samun sauƙin fita daga tsakanin dutse da wuri mai wahala ba.Rikicin yana farawa ta hanyar kawai tura abin kunnawa da hanyoyin aiki guda uku tare da maɓallin sauyawa sau biyu yana ba ku damar canzawa tsakanin gwargwadon bukatunku.

微信图片_20190907112652_副本

Spec

Ƙimar Wutar Lantarki 230V
Matsakaicin ƙididdiga 50Hz
Ƙarfin shigarwa 1500W
Gudun No-loading 850/min
Yawan tasiri 4500 Bpm
Tasirin Makamashi 6J
2M roba na USB  
Ƙarfin Aiki
don kankare max.32mm ku
don karfe max.13mm ku
domin itace max.40mm ku
Aiki 4 (tuki, rawar soja da guduma, chiselling, vario-kulle)
Na'urorin haɗi 1pc taimako rike, 3 rawar soja ragowa (8/10 / 12x150mm), 2 chisels (14x250mm), 1pc ƙura murfin, 1 pc zurfin guage

Shiryawa:

BMC/pc 2pcs/ kartani 42.5 x 25 x 34 cm
16.6/15.6kg 1520/2980/2980

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana