RH2657 1 in. 4 Functions Corded Variable Speed SDS-Plus Concrete/Masonry Rotary Hammer Drill



About this item:

  • MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 7 Amp motor with 4 Joules Impact Rate with SDS function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-1050RPM, 0-4860BPM, The drilling capacity: 1 inch for concrete, 1-1/2 inch for wood, 1/2 inch for steel.
  • FOUR FUNCTIONS Use the Knob to switch between (Demolition HAMMER DRILL) to make holes with SDS Drill bits, (Jack Hammer Chiseling) both position ideal for projects on Concrete, Brick, and Granite, etc., and normal (Drill Position) ideal for drilling and making holes in wood, metal, aluminum, etc. the last function (Position Adjustment) help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes.
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations
  • SAFETY CLUTCH offers protection if the bit ever gets jammed while use it in any tasks such as brick chipping, tile and floor removal, or even making hole in concrete, masonry, metal, or wood.
  • POWERFUL DESIGN SDS hammer drill with Active Vibration Reduction (AVR) dampening rotary hammer drill can help reduce hand-arm vibration through decoupling internal parts from the outside casting.

Product Detail

Product Tags


The four-function KANGTON RH2657 L-Type SDS drill tool has a very powerful 7Amps motor and speed pre-selection for optimum control. It has a hammer function for drilling in concrete, a hammer stop function for regular drilling, and a rotation stop function for chiseling jobs.
Convenient L-type and robust magnesium housing make this drill ideal for tough jobs involving drilling in concrete up to 1inch and for chiseling.
The SDS Plus system enables fast and easy accessory changing. The anti-slip soft grip and the 360 degree adjustable handle enable comfortable two-handed control.
Handy depth gauge you can set the drilling depth for blind holes.
The KANGTON RH2657 is supplied in a sturdy case with a set of three 8, 10 and 12 mm SDS plus concrete drill bits, a point chisel, a flat chisel and a 13-mm chuck with SDS Plus adapter, Extra carbon brush set.


Rated Voltage 230V
Rated Frequency 50Hz
Input power  800W
No-load Speed 0-1050/min
Impact rate 0-4860Bpm
Impact Energy 3.3J
2M rubber cable  
Working Capacity
for concrete  max. 26mm
for metal  max. 13mm
for wood  max. 30mm
Function 4 (drill, drill with hammer, Chisel, vario-lock)
Accessories  1pc auxiliary handle,3 drill bits-8/10/12x150mm, 2 chisels-14x250mm,1pc dust cover,1 pc depth guage   


BMC/pc 4pcs/carton 46x42x32cm
21/20kgs 1752/3600/4200

  • Previous:
  • Next:

  • Write your message here and send it to us